Installation Guide

Step 3

Photos 9 & 10 - F, F1, F2, F3 ONLY

A. (1) Mold size cutters A, B, C, D, E, insert stationary cutter into U shape bearings. (Photos 6, 7 & 8). (2) Insert stationary cutter with bearing into groove of mounted rotating cutters.

A. (1.1) Mold size cutters F, F1, F2, F3, insert bottom bearing tape into cutter groove. (Photos 9 & 10). (1.2) Insert stationary cutter (with 4 sides bearings in place) into cutter groove.

B. Tighten socket head cap screw with spacer/lock washer (Photo 11). Spacer/lock washer is necessary: to keep screw from hitting bottom of bearing.

• Step 1

• Step 2

• Step 3

• Step 4

• Assembly overview

• Considerations when shaft taper extends into cutter mounting area

• Drill and tap sizing chart

• Installation for special conditions

• Example of holding block installations

• How to select a wedge holding block for your cutter

• Zinc anode installation

• Positioning diagram of cutter blades

• Complete installation

• Order form

• Special installation requirements for fibreglass struts