Installation Guide

Zinc anode installation

RE INSTALL: Lower zinc anode over stationary cutter blade and screw down tightly

ELECTROLYSIS PREVENTION AND SOUND DEADENING FOR STATIONARY CUTTER ASSEMBLY.

To prevent electrolysis, a zinc anode has been installed on the stationary cutter assembly and must be replaced as necessary. (Stationary cutter is isolated)

THE DRIVEN CUTTER PORTION OF THE CUTTER ASSEMBLY IS CLAMPED TO THE SHAFT AND GETS IT ELECTROLYSIS PROTECTION FROM SHAFT ZINC OR PROP NUT ZINC.

• Step 1

• Step 2

• Step 3

• Step 4

• Assembly overview

• Considerations when shaft taper extends into cutter mounting area

• Drill and tap sizing chart

• Installation for special conditions

• Example of holding block installations

• How to select a wedge holding block for your cutter

• Zinc anode installation

• Positioning diagram of cutter blades

• Complete installation

• Order form

• Special installation requirements for fibreglass struts